Bumper- Rear

• 11-Gauge US Steel Construction
• Retain OEM Receiver Hitch And Wiring
• Pre-Cut Openings To Utilize Factory Sensors
• 100 Pct. Made In The USA

See All

• Ambush Series Rear Bumper

See All

• Smitty Bilt Apollo JL/JT Rear Bumper

See All

• Atlas Rear Bumper

See All

• Integrates The Existing Receiver Hitch
• Back Up Lights
• Back Up Sensor Holes
• Retains Receiver Hitch And Wiring Locations
• Pipe And Formed Treadplate
• Gloss Black Powder Coat

See All

• Combination Pipe And Tread Plate Construction
• Gloss Black Powder Coat
• Back Up Lights Included
• Pre-Drilled Sensor Holes
• Retains OEM Receiver Hitch And Wiring Locations
• MADE IN THE USA

See All

• 10-Stage Variable Valving
• High Pressure Nitrogen Charged
• Protects Vehicle From On And Off-Road Debris
• D-rings Included - 4.75 Ton Capacity
• D-Ring Mounts Welded Inside And Out For Increased Strength
• Black Finish

See All

• Low-Profile Desert Racing Design
• Two Light Mounts that Fit 3 In. Light Pods
• Fits up to a 37 In. Spare Tire
• Tube And Plate Steel Construction
• Paintable Aluminum Accent Panels
• Retains Full Functionality Of Oem Backup Sensors
• Accommodates Factory Tow Hitch
• Bolt-On Installation

See All

• Tubular w/Sheet Metal Design
• Keeps Bumper Weight To a Minimum
• Provides Superior Strength Over OEM Rear Bumper
• Tall Corners Keep The Lines Of The Vehicle

See All

• Built In Step Pockets For Easy Bed Access
• OE Sensor Compatible

See All

• Flat Black Powder Coat
• Back Up Sensor Holes
• Retain OEM Receiver Hitch And Wiring Locations
• Pipe And Formed Smooth Plate Steel

See All

• Bumper Meets Rear Flares To Create Convenient Step
• Available With Or Without A Tire Carrier
• Stand Up To 408 Hour Salt Spray Testing /Excellent UVU Protection
• Rear Parking Blind Spot Sensor Compatible
• Maintains Factory Receiver
• Provision To Relocate Backup Camera
• Made In The USA

See All

• Paintable
• Back Up Sensor Holes
• Retain OEM Receiver Hitch And Wiring Locations
• Pipe And Formed Smooth Plate Steel

See All

• Bumper Meets Rear Flares To Create Convenient Step
• Available With Or Without A Tire Carrier
• Stand Up To 408 Hour Salt Spray Testing /Excellent UVU Protection
• Rear Parking Blind Spot Sensor Compatible
• Maintains Factory Receiver
• Provision To Relocate Backup Camera
• Made In The USA

See All

• Higher Than Factory Ground Clearance
• 3.5 mm Steel Plates w/ 5 mm. Steel Supports
• Micro-Texture Black Powder Coat Finish
• Dual Clevis Mounts for 3/4 in. D-Ring Shackles
• Retains Factory Backup Sensors

See All

• Jeep Mid-Width Rear Bumper
• Mounts For 3 in. Light Pods
• 1 in. Thick D-Ring Mounts
• Compatible With Factory Hitch
• Fits Up To 37 in. Spare Tire / Max 4.5 in. Backspacing Wheels
• Welded Zip-Tie Tabs For Clean Wire Management
• Micro-Texture Black Powder Coat
• Paintable Aluminum Accent Panels
• Fully Bolt-On Installation

See All

• Integrated Steps On Either Side Of The Tailgate
• Durable Formed 3/16in. Steel Construction
• Retain OEM Receiver Hitch And Wiring Locations
• 3/4in. D-Ring Recovery Points
• 2 Stage Black Powder Coat

See All

• Easy To Install!
• Durable; Steel Construction
• Incl. [2] Rough Country Led Cubes
• Integrated Steps For Easy Access To Bed
• Retains Factory Receiver Hitch
• Incl. Backup Sensor Relocators

See All

• 10-Stage Variable Valving
• Durable Steel Construction
• Includes 2 Rough Country Led Cubes
• Integrated Steps For Easy Access To Bed
• Retains Factory Receiver Hitch
• Includes Backup Sensor Relocators

See All

• Provides A Stable Platform While Providing Max Towing Capacity
• Black Powdercoat Finish For Superior Corrosion Resistance
• Options Are Bolt On Receiver And Black Matte Finish
• Proudly Made In The USA

See All

• Direct Fit
• Manufactured From 3/16 and 1/4 Cold Roll Steel
• Solid Mount D-Rings Welded On The Inside And Out
• Two Stage Matte Black Finish Powder Coat Finish - 5 Year Limited Warranty
• Smittybilt Advantage Warranty

See All

• M1A2 Modular Rear Bumper For 14-18 Chevy Silverado

See All

• Form Fitted And Lightweight Design With A Modern - Futuristic Style
• 7-Gauge Smooth Steel With 12-Gauge Inserts / 1/4 in. Brackets And 3/4 in. Shackles
• Corrosion-Resistant / 3/5mm Thick - Carbide Black Powder Coat Finish
• Lightweight Yet Tough With Improved Strength Through Design And Fabrication
• Angled Wings For Increased Ground Clearance
• Perforated 12-Gauge Inserts Provide Protection To LED Lights
• Incorporates Spare Tire Lock Cover
• Enables Convenient Access To Factory Receiver Hitch
• Allows Re-Use Of OEM Trailer Plug Adapter

See All

• 2 Clevis Mounts That Take 3/4 In. D-Rings
• Includes Paintable Aluminum Inserts
• Utility Steps Located On Each Corner For Easier Bed Access
• Parking Sensors Are Retained
• Gusseted Construction For Strength
• Direct Fit Bolt-On Installation

See All

• Integrates With Existing Receiver Hitch
• Formed Steel Durability
• Gains Lower Steps And Recovery Points
• Stylish And Functional

See All

• Integrates With Existing Receiver Hitch
• Formed Steel Durability
• Gains Lower Steps And Recovery Points
• Stylish And Functional

See All

• Rear Bumper

See All

• 3/16 Inch Steel Plate Construction
• Bolt On Installation Includes Hardware
• Dual Shackle Plates For D-Rings Tie To Frame Rails
• License Plate Pocket Reuse OEM Lights
• Dual Process Black Powder Coat Finish
• Retain OEM Tow Hitch
• Can Mount TN-5293 Swing Arm Tire Carrier

See All

• 3/16 in. Cold Rolled Steel Plate Construction
• Dual Shackle Plates Tie To Frame Brackets
• Will Allow For TC 5293 Swing Arm
• Stronger Then OEM Bumper
• Dual Process Black Powder Coat Finish
• Easy At Home Installation With Only Hand Tools
• Return OEM Tow Hitch

See All

• 1/4 in. And 3/16 in. Steel Construction
• 2 Stage Powder Coat Finish
• DV8 No Hassle Warranty
• Lights Included

See All

• Aggressive Styling
• Integrated Tow Hooks And D-Ring Mounts
• Double Rung Side Step
• Fab Fours Signature Knife Edge Design
• Ease Of Installation
• Includes 16 Gauge Removable Skin
• Sensor Compatible
• 2 Integrated Pod Mounts For Reverse Lights
• Stainless Steel Hardware
• 2 Stage Matte Black Powder Coat
• 11 Gauge Steel Construction
• MADE IN THE USA

See All

• Direct Fit
• 2 And 4-Door Models
• Textured Black
• One-Piece Design
• Robotically Welded For Extreme Durability
• Pre-Cut Vertical Uprights For A Signature Look
• No Hitch
• 5 Year Limited Warranty

See All

• 3/16 in. Steel Plate
• Bumper Step For JT-2965
• Bolt-On Design
• Uses Factory Frame Mounting Holes For Extra Support
• Optional Bed Protector JT-5101
• Two-Stage Light Texture Finish In Black
• 3 Year Finish/Limited Lifetime Warranty

See All

• Slim Design
• Textured 3 Stage Powdercoat
• Solid Steel Construction
• Light Weight
• Bolt On Installation
• Standard Dv8 Warranty
• Aluminum Vents Can Be Color Keyed To The Jeep

See All

• Easy Bolt-on Installation.
• Aggressive Appearance.
• Incl. [2] Rough Country Led Cubes
• Incl. D-rings
• Retains Factory Receiver Hitch

See All

• Aggressive Design
• Winch Ready- Will Hold Up To 16.5K Winch (Depends On Vehicle)
• Perfectly Follows The Body Lines
• Side Mounting Slots And Tabs For Various Light Options
• Provides Far More Tire Clearance
• Integrated Shackle Mounts

See All

• Manufactured From Durable 5/32 Steel And 2x.120 Tubing
• Protects Vehicle From On And Off-Road Debris
• Incl. D-Ring Set
• Satin Black Finish
• Installation Hardware Included

See All

• Direct Fit That Enhances Factory Styling
• Compatible With Factory Hitch
• Features Welded-In Zip Tie Tabs For Clean Wire Management
• Fully Bolt-On Design That Doesnt Require Modification Or Drilling
• Aluminum Backed Logo
• Mounts 3 in. Light Pods
• Features 1 in. Thick D-Ring Mounts That Accept A 7/8 in. Pin
• Up To A 37 in. Spare Tire Will Fit Above The Bumper On The OEM Carrier
• Compatible With All Trim Levels
• Micro-Texture Black Powder Coat
• Satin Black Accent Panel
• All Mounting Hardware Is Included

See All

• Durable Black Powdercoated
• Made From Formed Channel
• Diamond Plated Step Plates And Skirts
• Comes Standard With Backup/Work Lights
• Factory Receiver Must Be Retained
• Black Matte Finish Is An Option
• Proudly Made In The USA

See All

• Raised corners for better entry and exit under the most extreme conditions
• Accommodates 3X3 Cube Led Lights
• Integrated 3/4 in. D-Ring Mounts
• Class Iii Receiver Hitch
• Integrated Jack Points
• Perfect Mid Width Design

See All

• Direct Fit
• Two Stage Textured Black Powder Coat Finish
• Dense Zinc Treated Undercoating
• Expertly Robotically Welded
• Bumpers

See All

• New solid D-ring and jack point mount - welded on the inside and out!
• Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
• UHMW ;ultra-high-molecular-weight polyethylene to provide the ultimate protection for rock crawling
• Aux back up light cut out provided
• 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powder coat finish 5 year limited warranty
• Smittybilt limited lifetime warranty
• Modular design; tire carrier can be added in the future.
• Class III hitch for true towing with towable d-ring

See All

• Direct Fit
• Black Powder Coat
• Dense Zinc Treated Undercoating
• Two Stage Textured Black Powder Coat Finish
• Expertly Robotically Welded
• Bumpers Bolt Directly To Your Vehicle
• Bumper Is 2 in. X .120 in. Wall
• 2 in. Receiver Rated Class III 9;000 LBS.

See All

• Standard Rear Bumper

See All

• Not Vehicle Specific
• 3mm Deep Drawn Formed Steel
• Winch Compatible Up To 12K
• Includes Modular Wings With Light Provisions
• Integrated D-Ring and Lift Points
• Oe Fog Light Provision
• Integrated Overrider With 13 in. Lightbar Provision

See All

• Safely Holds Up To 37 In. Tires
• Innovative Swing-Out System
• Includes 3rd Brake Light Relocation Bracket
• Includes License Plate Relocation Bracket
• Durable Steel Construction

See All

• Superior Strength And Styling
• Give Your Vehicle That Extra Cool Factor
• Two Front Side Openings Allow Light Options
• Sensor Compatible
• 11 Gauge US Steel

See All

• Bolt-on design for XRC GEN2 bumpers
• Frame pivot point for added strength
• Tuned one-handed opening operation; tuned to factory tailgate
• CB and jack mounts and Roto Pax® gas can holder
• Manufactured from 3/16 in. cold rolled steel
• Two-stage textured matte black finish

See All

• 18-Current Wrangler JL; 2-4 Door
• Adjustable Slant Tire Carrier
• Convertible Rotopax Mount Can Be Installed In Either Straight Or Slant Tire Configurations
• Included Adjustable 3rd Brake Light Bracket
• Retains OE Camera Location And Functionality
• Removable Trail Jack And Aerial Antenna Mount
• Steel Vent Cover
• Roller Bearing Pivot
• Fits Up To 40 in. Tire; With Single-Action Open And Close Feature

See All

• Direct Fit
• 2 And 4-Door Models
• Two Stage Matte Black Textured Powder Coat Finish

See All